All Products
-
Juan Guevaramuy buen trato con el vendedor y muy buena asesoria y el producto está trabajando muy bien ya tiene un año y no he tenido ningún problema -
Obert MatetakufaI'm very happy with the business deal and all the support they are giving . A very good business partner
Contact Person :
Sandra
Phone Number :
008619925291353
Whatsapp :
+8619925291353
PWM Analog Coolmay PLC HMI 12AI 8AO Support Portrait Display
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Dimension | 226*163*35.6mm | Cutout Size | 217*154mm |
|---|---|---|---|
| Type | 7" TFT | CPU | 32bit CPU 408MHz |
| Analog I/O | Max 12AI/8AO (optional) | DI/DO | Max 30DI/30DO (max 28MR) |
| High Light | PWM Analog Coolmay PLC HMI,Google Portrait Display Coolmay PLC HMI,12AI PLC HMI Panel |
||
Product Description
Special customized PWM-analog output port
The following parameters need to be provided during customizing selection:
-
The output voltage of the required PWM;
-
The output frequency of the required PWM;
-
Confirm the numbers of customized PWM, up to 8 PWMs. (depending on analog outputs that customer make).
-
Customize whether PWM coexists with other analog quantities. (If the product is additionally equipped with analog, analog output terminals DA0~DA3 are a group, DA4~DA7 are a group. When QM3G customizes PWM, the output frequency can only be installed with other analogs in a group when the output frequency is only 21KHz ).
Special customized PWM - output frequency setting
When customizing the PWM, you do not need to use the PWM command, just set the special register and then turn on the hardware.
The special registers used by each analog quantity correspond to the following table.
|
Analog output address |
DA0 |
DA1 |
DA2 |
DA3 |
DA4 |
DA5 |
DA6 |
DA7 |
|
Duty cycle setting |
D8050 |
D8051 |
D8052 |
D8053 |
D8054 |
D8055 |
D8056 |
D8057 |
|
PWM frequency division coefficient setting |
D8268 |
D8268 |
D8268 |
D8268 |
D8278 |
D8278 |
D8278 |
D8278 |
D8050 to D8057: the corresponding duty cycle, the value range is 0~4000, each 1 is 0.025%, and the total corresponds to 0~100%;
D8268 and D8278: the value range is 1~100000Hz (32 bits);
D8050 to D8057 ≦ D8268 and D8278
When D8268 and D8278 are powered on, the default setting is 21000Hz, and the power is not maintained. Program assignment is required when using.
Parameter:
|
Display |
Dimension |
226*163*35.6mm |
|
Cutout size |
217*154mm |
|
|
Type |
7"TFT |
|
|
Feature |
60K-color resistive touch screen, supports portrait display |
|
|
Memory |
RAM |
64MB |
|
ROM |
NOR Flash 16MB |
|
|
CPU |
32bit CPU 408MHz |
|
|
I/O |
DI/DO |
Max 30DI/30DO (max 28MR) |
|
DI/DO level |
Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact |
|
|
DO type and load |
Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM. |
|
|
Analog I/O (optional) |
Max 12AI/8AO |
|
|
AI type (optional) |
Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0~20mA/ 4~20mA/ -5V~5V/ -10V~10V / mixed |
|
|
AO type (optional) |
0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed/ -5~5V/ -10~10V (2AO for 1 minus voltage) |
|
|
High-speed function |
High-speed counting |
Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10 KHz |
|
High-speed pulse |
8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
|
|
Connection |
HMI |
Type-B HMI download port (can download PLC program through the USB penetrating function), RS232 |
|
1 RS485 (changed from default RS232) |
||
|
PLC |
1 Mini USB, 1 RS232 (program port) |
|
|
1 RS485 or 2 RS485 COM ports (one is changed from the default RS232 port) |
||
|
CAN (2.0A/B) port, Ethernet port, WIFI (will occupy default RS232 port) |
||
|
Software |
HMI |
Coolmay mView HMI Programming Software |
|
PLC |
Compatible with Mitsubishi GX Developer 8.86 and WORKS 2 |
Advantage:
◆ Powerful, compatible with FX3G/FX3U/FX3S PLC, high processing speed.
◆ Special encryption, prevent illegal reading thoroughly. 8-bit encryption, 12345678 as password can thoroughly prevent reading of ladder logic program.
◆ Clock supported, rechargeable battery adopted.
◆ Support Mitsubishi programming protocol/MODBUS protocol/RS protocol/BD board protocol, easily realize PLC interconnection and communication with external devices.
◆ Convenient wiring. All wiring terminals adopt 3.81 pitch pluggable terminals, which is convenient for customers to use.
◆ The PLC is compatible with Mitsubishi programming software, and the HMI uses TK series human-machine interface programming software mView.
Recommended Products