All Products
-
Juan Guevaramuy buen trato con el vendedor y muy buena asesoria y el producto está trabajando muy bien ya tiene un año y no he tenido ningún problema -
Obert MatetakufaI'm very happy with the business deal and all the support they are giving . A very good business partner
Contact Person :
Joanna
Phone Number :
008613316892240
WhatsApp :
+8613316892240
220v Single Phase Servo Drive RS485 Communication PLC For AC Servo Motor
Product Details
| Power Phase | Single Phase | Power Voltage | 200V+20% |
|---|---|---|---|
| Energy Consumption Braking | Support Built-in And External | Applicable Load | Less Than 3 Times Of Motor Inertia |
| Display Operation | 5-digit LED Digitaltube DispLay, 4 Operation Keys | Communication | RS485 PORT |
| High Light | Single Phase Servo Drive,220v Servo Motor Drive,RS485 Servo Motor Drive |
||
Product Description
220v Single Phase Servo Drive For Ac Servo Motor
According to the command mode and operation characteristics of a servo drive, it can be divided into three operation modes: position control operation mode, speed control operation mode and torque control operation mode.
The position control mode usually determines the displacement of the movement by the number of pulses, and the pulse frequency of the external input determines rotation speed.Because the position mode can strictly control the position and speed, it is generally used in thepositioning device. It is the most popular control mode and mainly used in robot, table placement machine, carving and milling, CNC machines and so on.
1 Direct control via switch
Minimalist motion control scheme
Ultra low cost design
Cyclic control of point motion
2 Controlled by i/o module of PLC
PLC pulse output module required
Reduce users' system design cost
Simpler control and easy operation
Parameter:
Wiring diagram of position control mode
1. The internal +24v power supply voltage range is 20v~28v, and the maximum working current is 100mA.
If an external 24V power supply is used, please connect the external power supply +24v to pin 16 (COM),
and the external power supply 0V to pin 43 (e0v).
2. The user of do output power supply needs to provide it by himself. The recommended
working powersupply voltage is DC24V, and the conduction voltage drop of do port is about 2.4V.
Please pay attention to it in application.The maximum allowable voltage of do port is DC30V
and the maximum allowable current is 50mA.
Recommended Products