아날로그 출력 통합된 HMI PLC 제어기 12DO 5 인치 TFT 디스플레이

Analog Output Integrated HMI PLC Controller 12DO 5 Inch TFT Display

Touch Panel Integrated HMI PLC Controller RS232 RS485 Analog Output Digital-I/O 12DO 5inch TFT Display

Model:EX3G-50KH-24MT-2DA-V-485P

-5inch touch screen

-12DI/12DO transistor

-2DA:2 analog output 0-10V

-one customized rs485 on PLC

-one default rs232 on PLC

Packing:

-1*5inch HMI/PLC all in one

-1*PLC programming cable

-1*HMI programming cable

-1*232 programming cable

Features:

1. Support interrupt,

2. linear arc interpolation,

3. PID auto-tuning.

4. 32K program capacity, 32K retentive register

Super functions:

 PLC is compatible with FX3G, FX3U, FX3S. It operates fast.

Highly integration.

1. The digital points are 30 inputs and 30 outputs at most. The digital output can be transistor, relay or mixed output. Analog can reach up to 16 input and 8 output. It has 2 PLC COM port (RS232 and Mini B-type USB port), 1 downloading port and 1 USB port on HMI.

2. The PLC part of models 70KH, 100HA all-in-one can optionally select one 485 port or two 485 ports (one is changed from existed 232 port), CAN, network port (not coexist with the one on HMI), Wifi (will cover the existed 232 port). The HMI part can optionally select one RS232 or one RS485, and network port (not coexist with the one on PLC).

3. The PLC part of models 43HB, 43(50)KH can optionally select two RS485, and HMI part can select one RS232.

Support several high-speed counting and high-speed pulse.

1. Commonly high-speed conting is 6-channel single phase 60KHz or AB(Z)2-channel 60KHz plus 1 channel 10KHz.

2. High-speed pulse is commonly 8 channels, HB series Y0-Y7 10KHz per channel, Acceleration and deceleration are independent.

3. The total high-speed counting and pulse can not exceed 480KHz. 32K steps program capacity, 32K power-off retentive registers, support interrupt, linear and circular interpolation, PID self-adjusting.

 Special encryption. Set password as 12345678 to thoroughly prevent reading data.(PLC only supports 8-bit password encryption)

PLC is compatible with Mitsubishi programming software, and HMI is Coolmay HMI programming software