Portrait Display PLC HMI Panel 4AI 2AO 12DI 12DO 4.3" TFT
|Program Port||1 TYPE-C, 1 RS232 ()||DI/DO||Max 12DI/12DO|
|High-speed Counting||Single Phase 6 Channel 60KHz, Or 2 AB 60KHz + 1 AB 10KHz||High-speed Pulse||8 Channels, Y0-Y3 Is 100KHz, Y4-Y7 Is 10KHz.|
|HMI Software||MView HMI Programming Software||PLC Software||GX Developer 8.86 And WORKS 2|
Portrait Display PLC HMI Panel,
4AI 2AO PLC HMI Panel,
12DI 12DO HMI PLC Board
Supports Portrait Display Integrated HMI PLC Max 4AI/2AO 12DI/12DO
Special customized PWM -- as Analog output
The following parameters are required for model selection:
1) the output voltage of the required PWM;
2) the output frequency of the required PWM;
3) Confirm the numbers of customized PWM, up to 8 PWMs. (depending on analog outputs that customer make).
4) Whether the customized PWM coexists with other analog. (If the product is separately equipped with analog, the analog output terminals DA0~DA3 are a group, and DA4~DA7 are a group. When custom PWM of 3G series products, Only when the output frequency is 21KHz,it can be used with other analog group. ).
|Feature||60K-color resistive touch screen, supports portrait display|
|ROM||NOR Flash 8MB|
|CPU||32bit CPU 408MHz|
Input: Passive NPN, public terminal isolated
Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact
|DO type and load||Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM.|
|AI type (optional)||
Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/
0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed
|AO type (optional)||0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed|
|High-speed function||High-speed counting||
Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz,
or 2 ABZ 60KHz + 1 AB phase 10 KHz
8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz.
High-speed counting + high-speed pulse < 480KHz
|Connection||HMI||Type-C HMI download port (can download PLC program through the USB penetrating function), RS232 port|
|PLC||1 TYPE-C, 1 RS232 (program port)|
1 RS485 or 2 RS485 COM ports (one of which is changed from the default RS232 port);
1 WIFI (occupy default RS232 port)
|Software||HMI||Coolmay mView HMI Programming Software|
|PLC||Compatible with GX Developer 8.86 and WORKS 2|
Support Y0-Y7 total 8 channels (please select transistor MT output);
There are no restrictions on pulse width and cycle, both in milliseconds (ms).
Special customized PWM-analog output port
The following parameters need to be provided during customizing selection:
The output voltage of the required PWM;
The output frequency of the required PWM;
Confirm the number of customized PWM, up to 4 channels of PWM can be customized (specifically, it depends on the number of analog outputs of the model selected by the customer).
Customize whether PWM coexists with other analog quantities. (If the product is additionally equipped with analog, analog output terminals DA0~DA3 are a group, DA4~DA7 are a group. When QM3G customizes PWM, the output frequency can only be installed with other analogs in a group when the output frequency is only 21KHz ).