30DI HMI PLC All In One GX Developer 8.86 Software 6 Channels
|ROM||NOR Flash 16MB||RAM||64MB|
|CPU||32bit CPU 408MHz||Analog I/O||(optional) Max 12AI/8AO|
|HMI Software||HMI Coolmay MView HMI Programming Software||HMI Connection||Type-B HMI Download Port|
GX Developer HMI PLC All In One,
30DI HMI PLC All In One,
6 Channels PLC Touch Panel
HMI PLC All In One GX Developer8.86 Software 217*154mm Cutout Size
Each PLC has its own programming port (RS232). Two communication ports (RS232 or RS485) are optional, and a CAN port is optional to meet the needs of users to connect several types of equipment.
◆ Upper computer programming software compatible with Works 2/GX Developer8.86 (supports Ladder diagram and SFC language, does not support structured programming/labels).
◆ Special encryption, prevent illegal reading thoroughly. 8-bit encryption, 12345678 as password can thoroughly prevent reading of ladder logic program.
◆ Clock supported, rechargeable battery adopted.
◆ Support Mitsubishi programming protocol/MODBUS protocol/RS protocol/BD board protocol, easily realize PLC interconnection and communication with external devices.
◆ High-speed counting, conventionally single-phase 6 channels 60KHz or AB (Z) phase 2 channels 60KHz + AB phase 1 channel 10KHz. High-speed pulse, conventionally 8 channels: Y0-Y3 is 100KHz, Y4-Y7 is 10KHz.
◆ Convenient wiring. All wiring terminals adopt 3.81 pitch pluggable terminals, which is convenient for customers to use.
|Feature||60K-color resistive touch screen, supports portrait display|
|ROM||NOR Flash 16MB|
|CPU||32bit CPU 408MHz|
|I/O||DI/DO||Max 30DI/30DO (max 28MR)|
Input: Passive NPN, public terminal isolated
Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact
|DO type and load||Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM.|
|AI type (optional)||
Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/
0~10V/ 0~5V/ 0~20mA/ 4~20mA/ -5V~5V/ -10V~10V / mixed
|AO type (optional)||
0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed/
-5~5V/ -10~10V (2AO for 1 minus voltage)
|High-speed function||High-speed counting||
Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz,
or 2 ABZ 60KHz + 1 AB phase 10 KHz
8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz.
High-speed counting + high-speed pulse < 480KHz
|Connection||HMI||Type-B HMI download port (can download PLC program through the USB penetrating function), RS232|
|1 RS485 (changed from default RS232)|
|PLC||1 Mini USB, 1 RS232 (program port)|
|1 RS485 or 2 RS485 COM ports (one is changed from the default RS232 port)|
|CAN (2.0A/B) port, Ethernet port, WIFI (will occupy default RS232 port)|
|Software||HMI||Coolmay mView HMI Programming Software|
|PLC||Compatible with Mitsubishi GX Developer 8.86 and WORKS 2|
The ADPRW instruction supports the following functions of MODBUS RTU:
No. 01 function: read the coil status, get the current status (ON/OFF) of a group of logic coils, the range is 1-512
No. 02 function: read the input status, get the current status (ON/OFF) of a group of switch inputs, the range is 1-512
No. 03 function: read the holding register, obtain the current binary value in one or more holding registers, the range is 1-125
No. 04 function: Get the current binary value in one or more input registers, the range is 1-125
No. 05 function: force a single coil, force a logic coil on-off state (write position), range 1
No. 06 function: load the specific binary value into a holding register (write register), the range is 1